Control Systems & PLC's

Shaft Mount

Fortune mechanical characteristics and properties of non-axial screw conveyor Overview

Zhengzhou Xinhai Machinery shaft screw conveyor design, manufacture and installation to ensure the delivery of equipment used meet the requirements of a high degree of operational reliability and minimal maintenance workload, ease of use in inspection and maintenance features.

    No shaft screw conveyor structure design to ensure the flow of materials handling, no blockage; in the course of their work with drainage.

    Mainly by the screw conveyor shaft screw shaft, U type spiral groove, cover, liner, into, a gate, outlet and drive the composition of input materials into the feed intake by the screw shaft, after promotion from a gate output.

    Drive:

    Put one end of drive screw conveyor, screw by motor reducer and the drive shaft directly connected form, without coupling, demolition, maintenance convenience, the drive shaft can withstand the bending moments and axial load simultaneously squeeze pressure.

    Drive unit (motor and reducer) using SEW produced high-quality shaft mounted gear unit structure, which operate a flexible, stable and reliable, no abnormal noise, gear box all the combination of face and input and output shaft seals will not leak .

    Drive motor suitable for 380V, 3 phase, 50Hz, its protection rating of IP55 (outdoor type), insulation class F class.

    Helical screw conveyor shaft Stainless steel blade with a dedicated cast from the mold, so they have sufficient strength and stiffness, and leaves the surface clean, no burrs, but also has a suitable rotation speed, effectively ensuring the transmission grid in the process of slag winding dirt does not occur, obstruction, while in the case of large transmission capacity will not spiral blade deformation.

    U-resistant lining spiral conveyor chute set semicircular shape, the arc set to spiral with no axis coincides with the radius to reduce the excess space to improve the delivery results; resistant lining with nylon material with high abrasion resistance, easy to install and replacement, long life.

    U-groove roll made of stainless steel, in addition to the feed port open, the other part of Canada flat along the spiral groove lid closed, the entire transmission process carried out in a sealed tank, reducing noise, reducing the odor of the discharge; in U-groove with the bottom of discharge, and complete drainage valve.

  Zhengzhou Xinhai Machinery shaft screw conveyor design, manufacture and installation to ensure the delivery of equipment used meet the requirements of a high degree of operational reliability and minimal maintenance workload, ease of use in inspection and maintenance features.

    No shaft screw conveyor structure design to ensure the flow of materials handling, no blockage; in the course of their work with drainage.

    Mainly by non-axial screw conveyor screw shaft, U-type groove, cover, liner, into, a gate, outlet and drive the composition of input materials into the feed intake by promoting non-axial screw, by the a gate output.

    Drive:

    Put one end of drive screw conveyor, screw by motor reducer and the drive shaft directly connected form, without coupling, demolition, maintenance convenience, the drive shaft can withstand the bending moments and axial load simultaneously squeeze pressure.

    Drive unit (motor and reducer) using SEW produced high-quality shaft mounted gear unit structure, which operate a flexible, stable and reliable, no abnormal noise, gear box all the combination of face and input and output shaft seals will not leak .

    Drive motor suitable for 380V, 3 phase, 50Hz, its protection rating of IP55 (outdoor type), insulation class F class.

    Helical screw conveyor shaft stainless steel blade through a dedicated mold casting, so they have sufficient strength and stiffness and blade surface smooth, no glitches, but also has a suitable rotation speed, effectively ensuring the transmission grid in the process of slag winding dirt does not occur, obstruction, while in the case of large transport volume will not spiral blade deformation.

    U-lined screw conveyor wear tank set semicircular shape, the arc set to spiral with no axis coincides with the radius to reduce the effect of excess space to improve transportation; wear-resistant lining with nylon material with high wear resistance, easy to install and replacement, long life.

    U-spiral groove formed by rolling steel sheet, in addition to the material inlet opening, the rest of Canada flat along the spiral groove lid closed, the entire transmission process carried out in a sealed tank, reducing noise, reducing the emission of odor; to U-groove with the bottom of discharge, and complete drainage valve.

  No high-speed operation without shaft screw conveyor parts, to enable transmission of low spiral wear, equipment energy province, low noise.

    Shaft screw conveyor easy to install, just support the use expansion bolts to steel can be fixed to the concrete foundation, it not only intermittent, but also continuous operation 24 hours a day.

    No shaft screw conveyor in the electrical design with overload protection, to meet the non-axial screw conveyor all-weather safe and effective operation.

    Control of the electrical components without shaft screw conveyor included in the grid-site electrical control box, the specific control requirements are detailed in the electrical grid control part.

    Sign on the device marked with a legible Chinese manufacturer name, device name, model, manufacture date, number and other equipment important parameters, and fixed equipment easy to see the location of the top products in the form of signs, size and technical requirements meet "sign" (GB/T13306) requirements.

    Equipment Parts corrosion: stainless steel parts to clean up first, and then pickling passivation can.

    Equipment test:

    In the equipment factory, the various parts of the equipment inspection, testing include: inspection of the exterior noise testing, reliability testing, electrical testing equipment and other items of inspection. Equipment, provision of equipment at the factory factory passing inspection reports, product certification, maintenance manual, warranty book and purchased parts certificate.

    Equipment installed in the field, to run two hours and with no-load load operation.

    No-load running 2 hours: equipment filling lubricant (grease), the first manual jog operation, simultaneous detection of space is hindering departments to determine the continuous operation without any trouble before, running without any abnormal vibration and noise, no-load run ended.

    With Load: screw conveyor belt according to the actual throughput load operation, inspection results to request delivery by two days running 24 hours a day without any mechanical failure in compliance.
About the Author

I am a professional editor from
Chinese Manufacturers
, and my work is to promote a free online trade platform.
http://www.chinaqualitycrafts.com/ contain a great deal of information about

retractable screen
,
adjustable window screen

welcome to visit!

bought a new front axle vacume switch for my 99 ford f150 but the shaft is facing the wrong way what do i doo?

This is the vacume switch that mounts to the front diff and shifts the truck into 4wd when you turn the knob in the cab. i have bought several and none of the shafts are facing the right direction.

Is it the original differential?
Do you have the correct year?
Call ford with the VIN # and double check the exact production date to make sure it's a 1999.
Get the correct part number from ford.
Certified Auto Technician
and Parts Specialist

Shaft Mounting Design: Multi Mount Rotational Moveable and Fixed