Function Signal
2009
 |
 AT8602B 02MHZ 2MHZ Digital Function Signal Generator $225.00 Time Remaining: 1h 20m Buy It Now for only: $225.00 |
Function Signal
Multi-Functional Handheld Signal Level Meter
Toronto, Canada - GAO Instruments (www.GAOInstruments.com) recommends its handheld signal level meter operating over 46MHz to 870MHz frequency band. Its price has been reduced to US$299,00 for a limited time only. The meter is intended for the installation and maintenance of CATV systems and also for the maintenance of digital, analog or bilateral networks. It has been widely used to test CATV signal levels in both channel and frequency modes and is especially useful for CATV stations due to its ability to display two channels simultaneously.
This multi-functional signal level meter, model A0500013, measures parameters including CATV TILT, C/N and trunk cable voltage effectively and accurately. It is able to scan 125 channels at the same time. The handheld meter offers a quick response without requiring warm-up and supports a level range of 30dBuV to 120dBuV. It displays all test results clearly on a large character backlit TN LCD screen and continuously works for five hours on a single charge. The portable signal level meter features a portable and rugged design, high-speed measurement and simple operation that make it one of the most popular instruments for general and integrated applications.
Visit http://www.GAOInstruments.com for more information or to purchase this product online.
For any sales inquires please contact:
1-877 585-9555 ext. 601-Toll Free (USA & Canada)
1-416 292-0038 ext. 601 -All Other Areas
sales@gaoinstruments.com
About GAO Instruments
GAO Instruments (www.GAOInstruments.com) is a global leader in research, development and manufacturing of high performance telecommunication testers, electronic measurement instruments and other test and measurement devices.
About GAO Instruments
GAO Instruments (www.GAOInstruments.com) is a global leader in research, development and manufacturing of high performance telecommunication testers, electronic measurement instruments and other test and measurement devices.
About the Author
About GAO Instruments
GAO Instruments (www.GAOInstruments.com) is a global leader in research, development and manufacturing of high performance telecommunication testers, electronic measurement instruments and other test and measurement devices.
Has anyone had problems with the left turn signal going out? Something connected with the hazard lights.?
I already replaced the multi-function turn signal device and it still does it. I've had it diagnosed and that's what it said it was. The left signal will not work at all, then you have to turn the hazard on and off to get it to work a few times. Any info would be appreciated.
I left out that this is on a 1999 Jeep Grand Cherokee Laredo. I already replaced the entire multi-function switch which has the turn signals, lights and hazard all in one. The left light will blink, then on the next turn, won't (not even light up). But, if you turn the hazards on then off (while the left turn signal is on), the left blinker will work for a few more turns. I have no problems with the right.
Normally I would say the problem could be in the hazard switch - which cuts the circuit to the turn signals. Unfortunately you are only have a problem with the left turn signal, which rules out the hazard switch (which would effect both left and right equally). That leaves a wiring problem on the left side circuit. Only way to check that is to run the wires til you find the problem.
Function - Variance (CH-Signal Laboratories Edit)
